Diverter Boxes
 These diverter boxes are used with casing advancement systems when drilling through overburden. They are mounted to the rig and travel with the casing and drilling string. The top of the casing slips inside the lower portion to divert the cuttings and fluids. A discharge hose at least 10 feet larger than the casing sections is recommended to direct the discharge away when the rotary head is raised all the way.
The Seal-O-Grip mud seal can be welded to the bottom of the diverter box to create a liquid tight seal to the casing. The Camlocks make an easy and quick connection for the discharge hose.
|
Click on Diverter Box size below to go to Dimensions page |
|
5" |
|
|
|
|
|
|
|
|
|
____________________________________________________________________________________
|
This diverter box system is designed to be used below the drill table and accommodates tripping in and out of the hole without removal. The main wear plate, below the wiper rubber, is made from Formalloy 400 steel, which is extremely wear resistant. The diverter with two additional adapters will handle 10", 8", and 6" casing.
|
Diverter box, top removed, with Adapters |
Diverter box, top attached, with Adapters
|
Diverter box with Adapters |
Upward view of Diverter box |
|
