|
America West Drilling Supply...Where going in the hole makes sense!
Generators
Construction grade portable power
QAX 24 (60 Hz)
|
Durable
- Solid engineering withstands rough handling and extreme environments
- Rugged construction uses Zincor steel with powder coat finish
- Smart design features standard, sealed, 110% fluid containment, no spill frame.
Efficient
- Carefully selected components and tested configuration maximize up-time
- 500-hour service intervals reduce total cost of ownership
- Dedicated voltage for most common applications.
|
Technical Data*
| Model |
QAX 24 |
| Voltage configuration (not switchable) |
|
240V - 3ph |
| Rated speed |
rpm |
1800 |
| Rated prime power |
kVA
kW
|
24
19.2
|
| Rate Voltage line to line (3 phase) |
V |
240 |
| Rate Voltage line to neutral (single phase) |
V |
139 |
| Rated current |
A |
57.7 |
| Maximum sound pressure level at 23 ft. |
dB(A) |
68 |
| Capacity fuel tank |
gal. |
12.13 |
| Fuel consumption at full load |
gph |
1.58 |
| Fuel autonomy at full load |
h |
13 |
| Alternator - Newage-Stamford |
| Model |
|
BCI 184 E1 |
| Degree of protection / Insulation class |
|
IP23 / H |
| Engine - DEUTZ |
| Model |
|
F3M2011F |
| Emission compliant |
EPA |
Tier 2 |
| Rated net output |
hp |
31.5 |
| Coolant |
|
oil |
| Number cylinders |
|
3 |
| Displacement |
cc |
2330 |
| Speed governing |
|
mechanical |
| Dimensions and weight |
| Dimensions (L x W x H) |
in. |
124.4 x 56.7 x 49.6 |
| Weight (ready to operate) |
lb. |
1973 |
| Power connection |
| Terminal board |
3p+N+G |
| Sockets |
Twist-Lock 2p+N+G, 50A, 240V (1x)
GFCI Duplex 1p+N+G, 20A, 127V (2x) |
*Reference condition: For engine performance to ISO 3046/1-1995, air inlet temperature from 0°F to 104°F., maximum altitude above sea level: 3281 ft.
Qc1002™ Control module |
Local/remote start |
Local/remote start - The comprehensive instrument panel enables the user to start the generator and supervise all key operating functions without opening the canopy. The panel is protected by a tough, transparent cover.
Built and tested to ISO 9001 quality assurance standards:
Atlas Copco's stringent manufacturing standards follow ISO 9001 quality assurance regulations. All components are produced and tested to exacting standards for optimum performance in the most demanding conditions. |
|
Danger: Compressed air should never be supplied as breathing air unless air is properly purified for breathing. Atlas Copco assumes no responsibility or liability related to the purchaser's/user's breathing air system.
The information contained herein is general in nature and is not intended for specific construction, installation, or application purpose.
|
