Tricone Bits (Reruns)
Tricone rotary bits are sometimes a good alternative to a DTH hammer. Available in TCI (carbide buttons) and mill tooth configurations.
We carry a large inventory of rerun bits and can also supply new bits. TCI bits are available for Medium Soft, Medium Hard, and Hard formations. Please call us to check stock.
Remember, when drilling with Tricone Bits you need to maintain proper down pressure to prevent premature bearing failure (see chart).
Below are typical sizes and price ranges that we have in stock.
Please call for availability.
Various configurations are usually available in each size.
Carbide Button Bits |
Typical Price Range |
|
Mill Tooth Bits |
Typical Price Range |
5 7/8" |
$800 - 1000 |
4 1/2" |
$150 - 250 |
6 1/8" |
$800 - 1000 |
4 3/4" |
$150 - 250 |
6 1/4" |
$800 - 1000 |
6 1/8" |
$450 - 650 |
7 7/8" |
$750 - 1000 |
6 1/4" |
$450 - 650 |
8 1/2" |
$800 - 1000 |
7 7/8" |
$550 - 750 |
8 3/4" |
$800 - 1200 |
8 1/2" |
$550 - 750 |
9" |
$800 - 1200 |
9 7/8" |
$650 - 850 |
9 1/2" |
$1400 - 1800 |
10 5/8" |
$1050 - 1200 |
9 7/8" |
$1800 - 2200 |
11" |
$1250 - 1450 |
10 5/8" |
$1800 - 2200 |
11 1/2" |
$1250 - 1450 |
11" |
$2000 - 2400 |
12 1/4" |
$1250 - 1450 |
12 1/4" |
$2300 - 2900 |
13 3/4" |
$1300 - 1600 |
17 1/2" |
$5000 - 6200 |
14 3/4" |
$2200 - 2500 |
20" |
$6000 - 7500 |
17 1/2" |
$2500 - 3500 |
Top of Page |
