The highest volume of compressed air per square foot. The most robust, versatile, and safety enhanced compressed air supply unit on the market.
High Demand
As the world economy grows, so does its demand for natural resources. Oil and gas exploration continue in all corners of the globe, while the mining of natural minerals and ores is at full capacity. To get to the bottom of these wells and keep the supply pipelines maintained, the industry is turning to higher and higher capacity compressors.
Atlas Copco has been in the compressor business for over 100 years, so we know about working under pressure. Since the beginning of the last century our company has required its own source of compressed air for its pneumatic tools. Our company has been innovating and listening to its customers on how to increase their productivity ever since.
Dedicated Design
The TwinAir is designed with dedicated material selections, high specification coatings, and proven Atlas Copco components.
Oiltronix(optional)
The electronic controlled oil temperature system extends the lifetime of air-ends, compressor components, oil, and the oil separator. This is achieved by eliminating the formation of condensate in the compressed air circuit.
FuelXpert(optional)
FuelXpert, with its electronic control module, regulates engine speed and air inlet with the goal of optimizing fuel consumption for each working condition. Importantly, when the air demand is lower than the output, the system ensures the right capacity for the application.
Ease of Operation
A standard 20 ft. ISO - CSC - DNV lifting compliant container has been built for safe handling onshore and offshore, in transport, and during installation.
TwinAir is a revolution in higher productivity. It has been developed to provide the highest output and airflow for its small footprint. Built robustly with the very highest quality parts and standards, everything has been designed to withstand years of heavy-duty use.
Different versions exist, including a specially adapted DNV approved model for offshore requirements.
High Specifications
Outstanding cooling performance: The proven optimal cooler configuration, larger air intake, and low airflow restriction are designed to optimize the cooling behavior of the TwinAir. The impregnated air filters function as a fine filter to protect the engine and the heart of the compressor, our air-end.
Assembly
Where possible all fixtures make use of materials such as stainless steel and special anti-corrosion inhibitors.
Seals
All doors have high specification seals with bottom drainage points.
Output Flexibility
Each compressor within the container can operate independently for flexibility of operations.
Intelligent Air Inlet System (optional)
A high-quality coalescer with acoustic louvered slats act as a pre-filter and protects the inside of the compressor from water, salt, and sand particles.
5
6
7
8
9
10
4
11
3
12
2
13
1
14
Oiltronix guarantees that there is virtually no water in the compressed air system, and therefore ensuring a longer air-end life.
Air outlets on the two short sides of the container.
Door latches with locks and door safe-hooks for better security and to avoid inadvertent closure.
Large service access doors, easy to service and clean internal components.
Ergonically designed built-in ladder system to access the roof for service. This is to be used in-line with standard safety practices.
Two CAT C13 engines. 440 HP each, for a combined total of 880 HP output. The pressure options range from 175 psi to 365 psi.
Standard 20-foot container with forklift slots and lifting eyes makes it easy to move around and can be stored up to 3 high (standard unit) and to 8 high (offshore).
Access controls for each engine are separate. Opt to run at half the maximum flow if desired.
Double ceiling roof for separation of cold intake and hot outlet air.
3 emergency stop buttons that disable both controls and power plants.
COSMOS, our innovative Comprehensive Service and Maintenance System, guarantees that you know where your machine is and when it should be serviced.
Pressure regulators positioned for easy access for adjusting.
Storage space for parts and small tool equipment.
Spillage-free skin frame to protect the environment from inadvertent spills.
A maximum free air output of 2232 cfm makes TwinAir the compressor with the highest airflow per square foot.
Controls including external fuel connections and emergency stop buttons readily accessible.
CSC certification makes it easily and legally transportable as container cargo.
Spark arrester prevents hot particles leaving the exhaust pipes in sensitive environments.
Pressure vessels certified ASME / CE standards.
DNV certification for offshore working environment, on specially modified machines: welded hinges, C-type front beam, additional vertical locks-short side, carbon steel tub, corrugated roof for traction / strength, set of slings for lifting, DNV stamp.
Coatings: High specification paint finishes for corrosion protection.
To increase the fuel efficiency and performance of teh engines, fuel coolers are a standard feature.
Maintenance service kits give all the necessary parts for servicing in one convenient kit.
Internal lighting for 24/7 operations.
FuelXpert guarantees best in class fuel efficiency.
Centralized service drains for fast and easy drainage at service intervals.
